·9 min read

CBAM supplier data: what EU importers need from non-EU producers

What an EU importer must obtain from each non-EU supplier under the CBAM definitive regime: the operator's emissions report, sector parameters, verification, the new carbon price report under 2026/2498, and how to share data confidentially.

CBAM supplier data: what EU importers need from non-EU producers

Under the CBAM definitive regime, an EU importer needs three things from each non-EU supplier: the operator's emissions report (or at least its summary) with the specific embedded emissions per good, the verification report issued by an accredited verifier, and a short list of sector-specific parameters such as the clinker-to-cement ratio or the scrap share and alloy content of steel. If the supplier claims a carbon price paid at home, a certified carbon price report is added. Without verified supplier data, the authorised CBAM declarant must use the Commission's default values, which carry a mark-up of 10% in 2026, 20% in 2027 and 30% from 2028 (1% for fertilisers).

This guide is written for EU buyers and procurement teams that source CBAM goods, and for the Turkish and other non-EU producers who receive their requests. It is based on the Commission's methodology act, Implementing Regulation (EU) 2025/2547 (Annex IV, the operator's emissions report template), Guidance No. 2 for non-EU operators, and Implementing Regulation (EU) 2026/2498 on the carbon price paid in third countries, published in the Official Journal on 16 November 2026. For a broader overview of sourcing from Türkiye, see our CBAM Turkey page for EU importers.

Why supplier data decides your CBAM cost

Since 1 January 2026 the declaration and financial obligation sit with the authorised CBAM declarant in the EU. For iron and steel, aluminium, cement and fertilisers, the 50-tonne annual threshold applies; above it, every import needs embedded emissions. The declarant can use actual values or default values. Actual values can only come from the producing installation, and only once they are verified.

The Commission's guidance to non-EU operators sets the expectation clearly: when CBAM goods enter the EU, the importer will contact the producer for embedded emissions data. Where goods pass through a trader, or serve as a precursor for another producer's CBAM good, the request travels along the chain. Starting early matters, because both the supplier's monitoring and the verifier's capacity take time.

The operator's emissions report: minimum content

Every installation that calculates embedded emissions on actual data must prepare an annual operator's emissions report and a summary. Use of the template is mandatory under Article 10 of the methodology act, and the report is drawn up in English, so the same information is always found in the same field. The summary contains at least:

ItemWhat it containsWhy the declarant needs it
Operator and installationName, registration number, address in English, CBAM Registry installation ID, UN/LOCODE, coordinates of the main emission sourceLinks every shipment to one installation
Production processes and routesGoods per process, by CN codeMatches declared goods to the right route
Specific direct embedded emissionst CO2e per tonne of goodCore value of the declaration
Indirect emissions (cement, fertilisers, sintered ore only)Specific indirect emissions, actual and default sharesRequired only for goods outside Annex II of the CBAM Regulation
Share of default valuesPart of embedded emissions based on defaultsShows data quality
Specific embedded free allocationPer good, with the CBAM benchmarks and method appliedFeeds the free allocation adjustment
PrecursorsCN code, country of origin, default or actual value, originating installationCompletes the embedded emissions of complex goods
Installation-level factsTotal direct emissions, measurable heat and waste gas flows, zero-rated fuels, CO2 captureContext for plausibility checks

The full report adds activity data per source stream, calculation factors, data gaps, energy balances and precursor quantities. That level of detail is for the verifier, not the buyer; see the confidentiality section below. Our step-by-step CBAM report guide explains how the report is built.

Sector-specific parameters you must not forget

Beyond emissions, the declarant reports qualifying parameters listed in point 2 of Annex IV to the methodology act. They are the most commonly missing items in supplier replies.

Goods categoryRequired parameter
CementClinker-to-cement ratio (%)
Urea, nitric acid, ammoniaPurity or concentration, nitrogen content
Mixed fertilisersNitrogen as ammonium, nitrate, urea and other forms, plus total N
Pig iron, DRIMain reducing agent; mass % of Mn, Cr, Ni and other alloy elements
Crude steel, iron or steel productsMain reducing agent of the precursor (if known), alloy content, tonnes of scrap per tonne of product, share of pre-consumer scrap
Ferro-alloysMass % of Mn, Cr or Ni and carbon
Unwrought aluminium, aluminium productsTonnes of scrap per tonne, pre-consumer share, total of non-aluminium elements if above 1%

For sector detail, see our guides on CBAM for steel and CBAM for fertilisers.

Verification: no verified report, no actual values

Supplier emissions and free allocation data can replace default values only if they have been verified by a verifier accredited by a national accreditation body in the EU, with an accreditation covering the installation's sector. One verification report is issued per installation. Under the Commission's timeline, the first verification reports are expected in January 2027 and the first annual declaration for 2026 imports is due on 30 September 2027.

In practice, ask suppliers now who their verifier is and when the site visit is planned. Unverified figures are useful for planning, but they cannot be declared as actual values. How consultants, verifiers and software share the work is covered in CBAM consultant vs software.

New: evidence of the carbon price paid in Türkiye

Implementing Regulation (EU) 2026/2498 of 5 November 2026 sets the rules for reducing the number of CBAM certificates by the carbon price effectively paid in a third country. It applies from 1 January 2026. Key points for buyers:

  • The operator prepares a carbon price report in English, using the Commission's template, and an accredited independent person certifies it with reasonable assurance.
  • Free allowances, reduced rates and refunds are deducted from the price paid; prices in foreign currency are converted into euro at the yearly average exchange rate published by the Commission.
  • A certified price can only be deducted where embedded emissions are based on actual values; where default values are used, only the default carbon price made available by the Commission for the country applies.
  • Annex II of the regulation lists the Türkiye Emission Trading System, with free allowances as the main type of rebate.

In the pilot phase of the Turkish ETS, 2026 is a reporting-only year and the free allocation rate for 2027 is 100%. Our reading is therefore that little or no deductible price should remain after free allocation in the near term; the certifying body makes the final assessment. Background: Turkey ETS pilot phase and CBAM certificate price and cost.

How data should be shared: the registry or email?

Guidance No. 2 describes two routes. The recommended one is for the non-EU operator to register in the O3CI module of the CBAM Registry; registration is currently voluntary.

Supplier registered in O3CISupplier not registered
UploadOnce per installation; shared with all declarants after verificationSent separately to each customer
What the declarant seesOnly the necessary summary dataThe declarant is obliged to request the complete verification report and emissions report
ConfidentialityDetailed installation data stays with the operator and verifierGuidance advises email only for non-confidential content unless encrypted
Precursor chainSharing with other operators planned for 2027One-to-one exchanges

For buyers this is a practical argument: asking suppliers to register reduces your record-keeping and removes the need to hold their trade secrets.

A supplier data request you can send

Keep the first request short and specific. A workable structure:

  1. Scope: CN codes, quantities and shipment period concerned, and the reporting period you need.
  2. Installation: CBAM Registry installation ID (or O3CI registration status), UN/LOCODE, address in English.
  3. Emissions: operator's summary emissions report with specific direct (and, where relevant, indirect) embedded emissions per good.
  4. Parameters: the sector-specific values from Annex IV, point 2, for each good.
  5. Verification: name of the accredited verifier and planned date of the verification report.
  6. Carbon price: whether a carbon price is claimed and, if so, the certified carbon price report.
  7. Sharing route: preferred channel (CBAM Registry or encrypted transfer) and a contact person.

Suppliers can use our CBAM and Turkish ETS readiness checklist to prepare their reply.

Common mistakes on both sides

  • Corporate footprint instead of CBAM data: a company-wide scope 1 and 2 total is not embedded emissions per good under the EU method.
  • Indirect emissions added to every good: for steel, aluminium and hydrogen only direct emissions count.
  • Missing precursors: purchased billets, clinker or ammonia must be reported with origin and embedded emissions.
  • Different figures for different customers: one installation and period should have one verified value.
  • Waiting until 2027: verifier capacity is limited and demand will peak before the first declaration.

Where Carbonet fits

Carbonet is a carbon management platform developed by LNA Soft in Izmir, Türkiye. Its CBAM module lets a producer define the installation, goods and CN codes, add production processes and purchased precursors, and calculate direct and indirect embedded emissions per product with the EU method. Fuel, electricity and process data entered for the corporate footprint flow into the CBAM calculation, and reports are available in English and Turkish, so buyers and verifiers receive consistent figures from one dataset.

Whether you are an EU importer helping Turkish suppliers get ready or a producer answering a data request, we can walk you through it with your own data. Request a demo or write to info@carbonet.com.tr (WhatsApp +90 533 368 05 99).

Frequently asked questions

What CBAM data should an EU importer request from suppliers?

The operator's emissions report or its summary with specific embedded emissions per good, the verification report from an accredited verifier, the sector-specific parameters listed in Annex IV point 2 of Regulation 2025/2547, and, if a carbon price is claimed, a certified carbon price report.

What happens if a supplier cannot provide data?

The declarant uses the Commission's default values with a mark-up of 10% in 2026, 20% in 2027 and 30% from 2028; for fertilisers the mark-up is 1%. This usually raises the number of CBAM certificates needed.

Can unverified supplier data be declared?

No. In the definitive period, actual values replace default values only if they are verified by a verifier accredited by a national accreditation body in the EU for the relevant sector.

Do suppliers have to register in the CBAM Registry?

Registration in the O3CI module is currently voluntary but strongly recommended. Registered operators upload data once and declarants see only summary data; without registration, declarants must request the complete verification and emissions reports.

Can the carbon price paid under the Turkish ETS be deducted?

Regulation 2026/2498 lists the Türkiye Emission Trading System and applies from 1 January 2026. Free allowances are deducted from the price paid. With a reporting-only 2026 and 100% free allocation for 2027 in the pilot phase, little or no deductible price is expected in the near term.

Is a supplier's corporate carbon footprint enough for CBAM?

No. A company-wide scope 1 and 2 total is not CBAM data. CBAM requires embedded emissions per good and installation calculated with the EU method, precursor data and sector-specific parameters.