CBAM consultant vs software: who does what in a carbon project?
The consultant sets up the method, the software applies it every month, the installation stays responsible and the verifier stays independent. Task split under EU verification rules, questions to ask a consultant and common mistakes.

A CBAM consultant and CBAM software do not replace each other; the work is split three ways. The consultant makes the method decisions with the plant team: scope, system boundaries, monitoring approach and how data gaps are estimated. The software applies those decisions the same way every month, collects the data and keeps the audit trail. The installation itself owns the calculation and remains responsible for it. A fourth party, the verifier, must stay independent: under EU rules, a verifier that supported the preparation of the monitoring plan or the emissions report cannot verify that installation.
This article treats "consultant or software?" as a false choice. Based on the European Commission's guidance documents of 14 August 2026 and the CBAM verification rules, it sets out which task belongs where, for producers outside the EU and for the EU importers who rely on their data.
Four parties: who is responsible for what?
The Commission's quick guide for non-EU operators (Guidance No. 2) places responsibility squarely on the installation, the "operator". Developing the monitoring methodology, designing and implementing the monitoring plan, collecting data and contracting a verifier are the operator's tasks. A consultant can help with each of them but cannot take over the responsibility.
| Party | Core role | What it cannot do |
|---|---|---|
| Installation (operator) | Owns the monitoring plan; generates the data, keeps records, chooses the verifier. | Hand its responsibility to a consultant or a software vendor. |
| Consultant | Method decisions, monitoring plan and written procedures, staff training, verification readiness. | Verify the same installation; taking over routine data entry for good creates dependence on one person. |
| Software | Data collection, calculation, factor management, repeatable report output. | Decide which method applies, or correct a wrong method decision that was entered into it. |
| Verifier | Independently assesses the monitoring plan and the report with reasonable assurance. | Provide consultancy; it may only give general recommendations for improvement. |
The EU importer (the authorised CBAM declarant) sits alongside this table. It submits the declaration and, according to the guidance, must request the complete verification report and emissions report from the installation if actual data are used. For the full process, see our guide on how to prepare a CBAM report.
Why your verifier cannot be your consultant
CBAM verification rests on two acts: the Verification Principles Implementing Regulation (EU) 2025/2546 and the Delegated Regulation (EU) 2025/2551 on accreditation and verification requirements. The Commission's guidance for verifiers and accreditation bodies summarises section 1.7.3 of Annex II to the delegated act as follows: a conflict of interest arises at least where the verifier and the operator share ownership, governance, management, personnel, resources, finances or contracts, or where the operator received consultancy on monitoring and reporting from an organisation related to the verifier in a way that threatens impartiality. In particular, the verifier must not have supported the development of the monitoring plan or the emissions report.
The guidance draws several practical lines:
- New staff with a history of monitoring and reporting consultancy should not join verification engagements until at least two years have passed.
- The verifier may recommend improvements to the monitoring plan in general terms, but may not prescribe how to achieve them.
- As a "gold standard" for independence, the operator may use different verifiers for the monitoring plan assessment and the annual verification.
- The verifier must hold a valid accreditation from a national accreditation body in the EU that covers the installation's sector.
The takeaway is simple: choose your consultant and your verifier from separate organisations, and ask before signing whether there is any ownership or shared-staff link between them.
A division of tasks: who does what?
The split below is our recommendation for a single-site producer with a handful of CBAM goods. At larger sites the plant team's share grows, and the consultant's share shrinks after the first year.
| Task | Plant team | Consultant | Software |
|---|---|---|---|
| CN code mapping and scope | Provides the product list | Decides and documents the rationale | Stores codes and product-process links |
| System boundaries and production processes | Provides site information | Defines the processes | Builds the process structure and precursor chain |
| Monitoring plan (English + local language) | Approves and applies it | Drafts it | Turns the plan's data flows into input forms |
| Monthly data entry (fuel, electricity, output) | Enters it | Checks it in the first months | Checks units and missing values |
| Emission and calculation factors | Supplies analyses and invoices | Selects and justifies the source | Applies the chosen source in every calculation |
| Precursor data from suppliers | Corresponds with suppliers | Prepares the data request template | Allocates precursor emissions to goods |
| Verification readiness | Collects evidence | Runs a pre-check | Produces a traceable report |
| Verification | Independent, accredited verifier (outside these three parties) |
The Commission's guidance says the monitoring plan should be available to the verifier in English, but since it serves as a "recipe book" for plant staff, a version in the local language is also advisable. For producers in Türkiye, working bilingually in Turkish and English is therefore a practical requirement rather than a nice extra.
Where a consultant adds the most value
The hard part of a CBAM calculation is not the arithmetic but the decisions and the documentation. A good consultant earns their fee here:
- Scope and boundaries: which product falls under which CN code, how the site is split into production processes, how shared heat and electricity are allocated.
- Method choice: calculation-based or measurement-based, standard values or laboratory analysis. For choosing factor sources, see our guide to emission factors.
- Written procedures: Guidance No. 3 (section 4.5.3) expects procedures supplementing the monitoring plan to cover roles and competence, data flow and control, quality assurance, estimation methods for data gaps, regular review of the methodology, a sampling plan where needed, and updating the list of products and precursors.
- Training: preparing the people who will carry on after the consultant leaves.
- Verification readiness: asking the verifier's questions in advance and finding missing evidence early.
What the software is for: applying decisions consistently
Decisions written down once and left alone tend to fall apart by the second year. Software fixes them in place: the process structure, factor sources and units are defined once, and afterwards data only needs to be entered. The Commission's guidance (section 4.5.4) names manual transfer of values into poorly protected spreadsheets as a significant data-flow risk; we explain why spreadsheet discipline gets harder over time in carbon accounting in Excel vs software.
Software does not replace the consultant on scope decisions, method decisions or the interpretation of unusual cases. A tool being "CBAM ready" does not make an installation's monitoring plan compliant on its own.
For consultancies: running many clients in one structure
A common problem for carbon consultants is building a separate file system for every client and pulling everything together by hand at period end. A calculation kept on the consultant's own computer is a risk for the client too: when the contract ends, the data and the calculation logic leave with the consultant.
Carbonet was designed for this scenario. In its multi-client structure each client's sites, data, users and reports are kept separate. The consultant sets up the method; the client's energy, logistics and purchasing departments enter only their own data under department-level permissions. The number of users does not change the price, and usage is credit-based. Because the data stay in the client's account, past years are not lost when the consultant changes. For the CBAM calculation steps see our CBAM embedded emissions calculation page; EU importers sourcing from Türkiye can also see CBAM Turkey. Carbonet is developed by LNA Soft in Izmir, Türkiye.
Seven questions to ask a CBAM consultant
- For how many installations, and in which CBAM sectors (steel, aluminium, cement, fertilisers), have you prepared monitoring plans?
- Do you have any ownership, shared staff or partnership link with a verification body?
- Do you deliver the monitoring plan and written procedures in both English and the local language?
- Whose account and which tool will hold the calculation, and what happens to the data when the contract ends?
- Is training our team part of the job, or will you take over data entry?
- Can the same data also support Türkiye ETS pilot-phase reporting?
- At which stage will you support us when the verifier raises questions?
The ETS question matters for Turkish producers: in Türkiye's ETS, verification is carried out by bodies accredited by TÜRKAK under ISO/IEC 17029. Collecting CBAM and ETS data for the same site in two separate systems creates differences between the two reports that are hard to explain. Our CBAM and Türkiye ETS readiness checklist sets out the order of preparation.
Common mistakes
- "Handing over" the calculation to the consultant: the report arrives, but the plant team cannot explain where the numbers come from, and the verifier's questions come back to the plant anyway.
- Not asking about links between consultant and verifier: if a conflict of interest surfaces at verification stage, changing verifier costs time.
- Mistaking software for a method: a ready-made template that does not fit the plant's process structure produces a result that looks right but is wrongly allocated.
- Contacting the verifier late: the Commission advises looking for a verifier early in the reporting period to avoid the year-end bottleneck.
Conclusion
A sound set-up for CBAM and carbon footprint projects looks like this: the installation owns the work, the consultant sets up the method and trains the team, the software applies the decisions consistently and keeps the trail, and the verifier stays independent of all three. The split leaves more work with the consultant in year one and reduces cost and single-person dependence in the years after.
If you are a consultancy that wants to run clients in one structure, or a producer that wants to work on the same data as your consultant, request a demo or write to info@carbonet.com.tr or on WhatsApp (+90 533 368 05 99).
Sources: European Commission CBAM Guidance No. 2 (quick guide for non-EU operators) and Guidance No. 3 (calculation methods), 14 August 2026; Commission guidance on CBAM verification and accreditation for verifiers and national accreditation bodies; Implementing Regulation (EU) 2025/2546; Delegated Regulation (EU) 2025/2551; Türkiye Emissions Trading System Regulation (Official Gazette 27.08.2026, No. 33353). The division-of-tasks table is the author's recommendation, not a legal requirement. This article is for general information only.
Frequently asked questions
Do I need a CBAM consultant or CBAM software?
Most producers need both. The consultant sets up decisions such as scope, system boundaries, monitoring approach and written procedures; the software applies those decisions consistently every period, collects the data and keeps the audit trail. With an experienced in-house team, the consultant's share can fall after the first year.
Can our consultant also carry out the CBAM verification?
No. Under the EU accreditation and verification rules (Delegated Regulation 2025/2551), an organisation that supported the preparation of the monitoring plan or the emissions report cannot verify that installation. The verifier must be an independent body accredited in the EU, with no ownership or shared-staff link to the consultant.
Who is responsible for CBAM emissions data?
The installation, i.e. the operator. According to the Commission's guidance, designing and implementing the monitoring plan, collecting data and contracting a verifier are the operator's tasks. Consultants and software vendors help, but do not take over the responsibility. The declaration itself is submitted by the authorised CBAM declarant in the EU.
In which language should the monitoring plan be written?
The Commission's guidance for non-EU operators says the monitoring plan should be available to the verifier in English, and recommends a local-language version so that plant staff can use it. For installations in Türkiye, a Turkish and an English version is the practical solution.
What happens to past data if we change consultant?
If the calculation is kept in the consultant's own files, the data and the calculation logic may leave with the consultant. It is therefore advisable to keep the calculation in a tool and account that the installation controls, and to state data ownership clearly in the contract.
Is Carbonet suitable for consultancies?
Yes. Carbonet's multi-client structure keeps each client's sites, data, users and reports separate, with department-level permissions and unlimited users; usage is credit-based. Carbonet is developed by LNA Soft in Izmir, Türkiye.