CBAM for fertilisers: per-kg-N calculation, precursors and Türkiye defaults
CBAM embedded emissions for fertilisers are calculated per kilogram of nitrogen, including indirect emissions and precursors such as ammonia and urea. The Commission's Türkiye example, default values and what producers should do now.

Under CBAM, fertiliser embedded emissions are calculated per kilogram of nitrogen contained in the product, not per tonne of product. Ammonia, nitric acid, urea and nitrogen-containing mixed fertilisers (AN, CAN, UAN, NP, NK, NPK) are in scope, and the calculation includes direct emissions, indirect emissions from electricity and the embedded emissions of purchased precursors. For a mixed fertiliser plant, most of the total comes from precursors, so the data from your ammonia and urea suppliers matters more than your own stack.
This article is based on the European Commission's sector guidance on fertilisers (Guidance 5C, 14 August 2026), the methodology regulation (EU) 2025/2547 and the default values regulation (EU) 2025/2621 as corrected by 2026/1740. It is written for fertiliser producers in Türkiye and for EU importers who buy from them. If you are new to the mechanism, start with our guide to CBAM; cement and aluminium are covered in a separate sector article.
Which fertiliser goods are covered by CBAM?
The Commission groups fertiliser goods into four aggregated goods categories. They cover finished fertilisers as well as the intermediate products consumed to make them.
| Category | CN code | Note |
|---|---|---|
| Ammonia | 2814 | Anhydrous or in aqueous solution; reported as 100% ammonia |
| Nitric acid | 2808 00 00 | Including sulphonitric acids; reported as 100% nitric acid |
| Urea | 3102 10 | Whether or not in aqueous solution |
| Mixed fertilisers | 2834 21 00, 3102 (excl. urea), 3105 (excl. 3105 60 00) | Potassium nitrate, nitrogenous fertilisers, NP, NK, NPK |
Fertilisers containing only phosphorus and potassium (3105 60 00) are excluded. The Commission's reasoning is simple: only nitrogen-containing fertilisers carry significant embedded emissions. Ammonium nitrate, calcium ammonium nitrate, ammonium sulphate, ammonium phosphates and urea ammonium nitrate solutions all fall under "mixed fertilisers".
Why the unit is kilograms of nitrogen, not tonnes
In the definitive period, the functional unit for fertiliser goods is kilograms of nitrogen contained in the goods (Article 4(4) of the methodology regulation). The annual emissions of the installation or production process are divided by the total nitrogen produced in the year, giving t CO₂e per kg N. The per-tonne value of any shipment is then that figure multiplied by the product's nitrogen content in kg N per tonne (Equation 65).
- Different nitrogen contents: where one plant sells several grades, products are grouped into nitrogen-content ranges no wider than 10%, and the average nitrogen content of each range is used.
- Custom blends: for compositions made to a customer's order, the producer issues a nitrogen content declaration for each consignment, with the per-tonne value calculated for that consignment.
- Label data can be reused: the EU Fertilising Products Regulation (EU) 2019/1009 already requires nitrogen content by form (ammonium, nitrate, urea, other) on the packaging or delivery documents, and these values may be used for the calculation.
This solves an old problem. A single granulation line may produce dozens of NPK grades, but it does not need separate monitoring for each one. The annual total is enough; the difference between grades is captured by nitrogen content.
Which emissions count, and which do not?
Fertiliser goods are not listed in Annex II of the CBAM Regulation, so, as with cement, indirect emissions from electricity are part of embedded emissions. According to the guidance, the following must be monitored:
- CO₂ from fuel combustion in stationary equipment (vehicles and mobile machinery excluded).
- Process CO₂ and N₂O. N₂O is relevant only for nitric acid production and must be measured with a continuous emission measurement system (CEMS); one tonne of N₂O counts as 265 tonnes CO₂e.
- CO₂ consumed in urea production. It does not qualify as permanently chemically bound, so it remains an emission of the installation.
- Emissions from producing measurable heat (for example steam) consumed in the process, wherever that heat is generated.
- Carbonates used in flue gas cleaning, such as soda ash.
- Indirect emissions from electricity consumed, reported separately from direct emissions.
What is excluded or set to zero matters too. N₂O from fuel combustion is outside the system boundary. Heat recovered from exothermic reactions, such as in ammonia or nitric acid production, is assigned zero emissions. Electricity generated without combustion, for example by expansion turbines in an ammonia plant, has an emission factor of zero. The indirect emissions of hydrogen bought from another installation or produced in a separate process are not added to ammonia; in a conventional Haber-Bosch plant, however, hydrogen production is an integrated step, so electricity for the whole process is counted.
The precursor chain: from ammonia to NPK
| Product | Production route | Possible precursors |
|---|---|---|
| Ammonia | Haber-Bosch with steam reforming or gasification | Hydrogen, if produced separately |
| Nitric acid | Oxidation of ammonia (Ostwald) | Ammonia |
| Urea | Synthesis from ammonia and CO₂ | Ammonia |
| Mixed fertiliser | Mixing, neutralisation, granulation | Ammonia, nitric acid, urea, mixed fertilisers (e.g. ammonium nitrate) |
Inputs such as potassium chloride, single superphosphate, phosphoric acid and sulphuric acid have no embedded emissions and are left out. In an integrated site where ammonia, nitric acid and fertiliser are produced together, the chain is built internally. If ammonia or urea is purchased, verified data from the supplier is needed; otherwise a default value applies.
The Commission's worked example: NPK 15-15-15 made in Türkiye
The guidance's worked example places the installation in Türkiye. It produces NPK 15-15-15 by granulation, buys ammonia and urea from Azerbaijan, and uses default values with the 1% mark-up for those precursors. Indirect emissions of granulation use Türkiye's grid factor from Annex II of the default values regulation.
| Item | Input per tonne of product | Embedded emissions (t CO₂e/t product) |
|---|---|---|
| Ammonia (2.273 t CO₂e/t) | 93 kg | 0.211 |
| Urea (1.545 t CO₂e/t) | 160 kg | 0.247 |
| Granulation, direct (natural gas in the dryer) | - | 0.018 |
| Granulation, indirect (electricity) | - | 0.0126 |
| Total | - | 0.489 (0.00326 t CO₂e/kg N) |
For 100 tonnes of NPK 15-15-15 imported into the EU, embedded emissions are 48.9 t CO₂e. Our own reading of the numbers: about 94% of the total comes from the two precursors, while the plant's dryer and electricity account for only 6%. For a mixed fertiliser producer, the first lever is verified data from ammonia and urea suppliers. How to choose an electricity factor is explained in our article on emission factors.
What are the default values for Türkiye?
Without actual data, the country default value applies. The mark-up for fertilisers differs from other sectors: steel, aluminium and cement get 10% in 2026, 20% in 2027 and 30% in 2028, while fertiliser goods get 1% in all three years (Turkish Ministry of Trade default values page; the Commission's example is also calculated with 1%). Selected rows for Türkiye from the Commission's corrected table, per tonne of product, before the mark-up:
| Product | CN | Direct | Indirect | Total |
|---|---|---|---|---|
| Nitric acid | 2808 00 00 | 2.680 | 0.030 | 2.720 |
| Anhydrous ammonia | 2814 10 00 | 2.170 | 0.100 | 2.270 |
| Urea (>45% N, solid) | 3102 10 19 | 1.440 | 0.080 | 1.510 |
| Ammonium sulphate | 3102 21 00 | 0.630 | 0.060 | 0.680 |
| Ammonium nitrate | 3102 30 90 | 2.530 | 0.070 | 2.600 |
| CAN (≤28% N) | 3102 40 10 | 2.160 | 0.070 | 2.230 |
| UAN solution | 3102 80 00 | 1.580 | 0.060 | 1.640 |
| DAP | 3105 30 00 | 0.510 | 0.040 | 0.550 |
| NPK (>10% N) | 3105 20 10 | 1.060 | 0.060 | 1.120 |
Our interpretation: with a 1% mark-up, fertiliser defaults are not punitive in the way steel defaults are. Actual data pays off when your plant performs better than these values; if it does not, declaring defaults remains possible. Two things still make actual data worth having. EU buyers increasingly prefer suppliers with verified data, and the Turkish ETS requires installation-level monitoring anyway. The default values are due to be reviewed by 2027 at the latest, so do not assume today's figures will last. How the number of certificates is calculated is covered in our article on the CBAM certificate price.
Fertilisers in the Turkish ETS
In the pilot phase of Türkiye's Emissions Trading System, fertilisers are covered alongside electricity, cement, iron and steel and aluminium. 2026 is a reporting-only year, and the deadline for the monitoring methodology plan is 27 January 2027. The fuel, process, N₂O and electricity data collected for CBAM also feeds the ETS report; running the two in separate spreadsheets means collecting the same data twice. For EU importers, this matters because a supplier preparing for the ETS is building the same data base CBAM relies on. See our Turkish ETS article and the step-by-step readiness checklist.
What should a fertiliser producer do now?
- List the CN codes of products shipped to the EU and separate out-of-scope items such as 3105 60 00.
- Define production processes: are ammonia, nitric acid, urea and mixed fertiliser lines separate or on one site?
- Record the nitrogen content of each grade and its forms (ammonium, nitrate, urea); set up consignment-level declarations for custom blends.
- Ask suppliers of ammonia, urea and nitric acid for verified embedded emissions data.
- If you produce nitric acid, review the location and data quality of your N₂O measurement system (CEMS).
- Separate electricity, steam and recovered heat flows by meter, and talk to a verifier early.
If you are an EU importer, the same list works as a supplier questionnaire: ask for CN codes, nitrogen content per grade, precursor sources and the verification status of the data.
Where Carbonet fits
Carbonet is a carbon footprint and CBAM software developed by LNA Soft in Izmir, Türkiye. Installation data, emission sources, energy balance, production processes, purchased precursors and combined heat and power are kept on one screen; indirect emissions, which are required for fertilisers, are added using the EU method, and all 569 CN codes of the EU goods list are built in. The output is direct and indirect embedded emissions per product, ready to send to your EU buyer, in Turkish and English. Details are on our CBAM embedded emissions calculation page; importers sourcing from Türkiye can also see CBAM Turkey.
Conclusion
Three things drive the CBAM calculation for fertilisers: the per-kg-nitrogen unit, the precursor chain and indirect emissions. The Commission's own Türkiye example shows that most of the embedded emissions of a mixed fertiliser come from purchased ammonia and urea. The 1% mark-up eases the pressure today, but buyer demand and the Turkish ETS make installation-level data unavoidable.
To set up the calculation for your fertiliser products, request a demo, write to info@carbonet.com.tr or reach us on WhatsApp: +90 533 368 05 99.
Frequently asked questions
What unit is used for CBAM embedded emissions of fertilisers?
In the definitive period the functional unit is kilograms of nitrogen contained in the goods. Annual emissions are divided by total nitrogen produced to give t CO₂e per kg N, and the per-tonne value is that figure multiplied by the product's nitrogen content. Different grades are grouped into nitrogen-content ranges no wider than 10%.
Are indirect emissions from electricity included for fertilisers?
Yes. Fertiliser goods are not listed in Annex II of the CBAM Regulation, so indirect emissions from electricity consumed are included and reported separately from direct emissions. Only the indirect emissions of hydrogen bought in or produced in a separate process are not added to ammonia.
Are phosphorus and potassium fertilisers covered by CBAM?
Fertilisers containing only phosphorus and potassium (CN 3105 60 00) are excluded. Nitrogen-containing NP, NK and NPK fertilisers, potassium nitrate, ammonium nitrate, CAN, UAN and ammonium phosphates are in scope.
What mark-up applies to fertiliser default values?
For fertiliser goods the mark-up is 1% in 2026, 2027 and 2028. For steel, aluminium and cement it is 10% in 2026, 20% in 2027 and 30% in 2028. Default values are due to be reviewed by 2027 at the latest.
Can CO₂ used in urea production be deducted?
No. CO₂ from ammonia production that is used in urea synthesis does not qualify as permanently chemically bound. It therefore remains an emission of the producing installation and is part of embedded emissions.
What is required for custom NPK blends?
For blends made to a customer's order, the producer issues a nitrogen content declaration for each consignment and calculates embedded emissions per tonne using that consignment's nitrogen content. Label data required by the EU Fertilising Products Regulation can be used for this.