GHG base year: how to choose it and when to recalculate
How to choose a GHG base year and when to recalculate it: acquisitions, divestments, site closures, methodology changes, significance thresholds and a worked example under the GHG Protocol.

A GHG base year is the reference year a company compares its current emissions against. Under the GHG Protocol Corporate Standard you choose a year with verifiable data, state why you chose it, and recalculate base year emissions retroactively when acquisitions, divestments, mergers, methodology changes or significant errors would otherwise distort the comparison. Production growth, a changing product mix and opening or closing your own sites do not trigger recalculation: they are real changes in what reaches the atmosphere. This guide explains how to pick the base year, what belongs in a recalculation policy and which cases are most often misread, with a worked example.
It is based on chapter 5, "Tracking Emissions Over Time", of the GHG Protocol Corporate Standard (revised edition). The Corporate Standard is under revision in 2026; the rules below are from the edition currently in force. EU buyers who ask Turkish and other non-EU suppliers for emissions trends will find the same logic useful when they review supplier data. If scopes are still unclear, start with our scope 1, 2 and 3 guide.
Why a base year matters
You cannot say emissions went down without a fixed point of comparison. The GHG Protocol calls it base year emissions and ties public reporting, target setting, risk management and investor requests to it. When the same year is used as the starting point of a reduction target, it is called the target base year.
Any claim such as "we cut emissions by 20%" invites three questions: compared with which year, with which sites, and with which emission factors? Verifiers and EU customers increasingly expect the answers in writing.
How to choose the base year
The requirement itself is short: choose and report a base year for which verifiable emissions data are available and explain the choice. The guidance adds that companies should pick the earliest relevant year with reliable data. In practice, four questions help:
- Is the data complete? Gas, electricity, fuel and refrigerant records for that year should be complete and backed by documents. A year without evidence cannot be verified.
- Is the year representative? A year with a long shutdown, an unusual order spike or a major breakdown does not reflect the normal emissions profile.
- Are the boundaries settled? It should be clear which sites and entities are included under the control or equity share approach.
- Is scope 3 included? If you plan to add scope 3 later, a separate base year for it is possible.
Instead of a single year, you may use the average of several consecutive years. The standard cites the UK ETS, which used the 1998–2000 average; a multi-year average smooths out one-off fluctuations. The standard also notes that some organisations chose 1990 to align with the Kyoto Protocol, while warning that reliable data for such an early year is hard to obtain.
Which documents feed the inventory is covered in our carbon footprint data collection guide. Base year evidence is the evidence you will keep longest.
Fixed or rolling base year?
The default is a fixed base year: the year stays the same and its emissions are recalculated when needed. For companies that keep growing through acquisitions, the standard also describes a rolling base year that moves forward by a number of years at regular intervals. A fixed base year allows like-with-like comparison over a longer period, and according to the standard most emissions trading and registry programmes require one.
When must the base year be recalculated?
Companies must write a base year recalculation policy and apply it consistently, for increases and decreases alike. The standard lists the following triggers and explicit non-triggers:
| Change | Recalculate base year? | Reason |
|---|---|---|
| Merger, acquisition, divestment (significant) | Yes | Emissions move between companies; the atmosphere sees no change. |
| Outsourcing or insourcing of emitting activities | Yes, unless covered in scope 2 / 3 reporting | A shift from scope 1 to an unreported scope 3 breaks the comparison. |
| New calculation method, better emission factors or activity data (significant) | Yes | The same source is measured differently; the base year must use the same method. |
| Significant error, or several errors that add up | Yes | A wrong reference distorts every later comparison. |
| Higher or lower output, changing product mix | No | Organic growth or decline: a real change in emissions. |
| Closing or opening your own operating units | No | The standard treats this as organic change too. |
| Acquiring a facility that did not exist in the base year | No | It had no base year emissions; history is adjusted only back to the year it came into existence. |
| Change of fuel or technology (e.g. heavy fuel oil to natural gas) | No | A genuine reduction that should show in the report. |
One small acquisition may not matter, but the standard stresses that the cumulative effect of several minor structural changes can be significant and must be assessed together.
Significance threshold: what percentage?
If the policy uses a significance threshold, it must say so. The threshold can be quantitative or qualitative; setting and disclosing it is the company's job, and confirming adherence is the verifier's. The GHG Protocol does not prescribe a figure. As an example it cites the California Climate Action Registry, which used 10% of base year emissions, counted cumulatively from the time the base year was set.
Balance two risks when you choose: set it too low and you rewrite history after every minor change; set it too high and a large acquisition looks like growth or a divestment looks like a reduction. If you report under an external programme, such as a target validation initiative or an emissions trading system, that programme's threshold and rules apply; the standard itself acknowledges that external programmes may set their own base year rules.
Worked example: acquisition, closure and sale
The example is hypothetical. A metalworking company sets 2024 as its base year: site A 6,000 and site B 4,000 tonnes CO2e, 10,000 tonnes in total. Its policy uses a 5% cumulative threshold.
| Event | Base year (t CO2e) | Reporting year (t CO2e) | Change vs base year |
|---|---|---|---|
| 2024 starting point | 10,000 | 10,000 | – |
| 2025: site C acquired on 1 July (1,500 t in 2024), without recalculation | 10,000 | 11,200 | +12% (misleading) |
| 2025: recalculated (1,500 / 10,000 = 15% > 5%) | 11,500 | 11,200 | −2.6% |
| 2026: site B closed (organic) | 11,500 | 7,150 | −37.8% (real) |
| 2026: site B sold to another company instead | 7,500 | 7,150 | −4.7% |
Three lessons follow. First, after a mid-year acquisition the base year is recalculated for the entire year, and the reporting year is also stated on a full-year basis for consistency; this avoids a second correction the following year. If data for the acquired site is not yet available, the recalculation may move to the next year. Second, closing a site genuinely cuts emissions and leaves the base year untouched. Third, selling the same site does not remove its emissions, it only moves them to the buyer, so they come out of the base year and the reduction stays small.
Methodology changes and errors: the common case
For many manufacturers the most frequent trigger is not an acquisition but a method change or an error. Two typical cases:
- Calorific value on gas invoices. In Türkiye, gas invoices state kWh on a gross calorific value basis, while IPCC fuel factors use net calorific value. If the base year skipped the conversion, gas emissions came out roughly 11% too high. With gas at 60% of total emissions, the total is about 6% too high, which exceeds a 5% threshold and requires a base year correction.
- Moving to a more accurate electricity factor. The standard's own example: a company used a national grid factor in year one, then obtained a more accurate supplier-specific factor for current and past years. If the difference is significant, historic data is recalculated with the new factor.
The dividing line: changes in factors that reflect real changes, such as fuel or technology, do not trigger recalculation. Our reading is that the routine annual update of a grid emission factor usually falls into that group: each year uses its own factor and the base year keeps its own. If you find a more accurate factor for the same year, the base year is corrected. Factor sources are compared in our emission factors guide.
When better data cannot reasonably be applied to past years, the standard allows two routes: backcasting, or acknowledging the change in the report without recalculation. In the second case, repeat the note in later reports; otherwise readers two or three years on may draw the wrong conclusion.
What goes into a recalculation policy
Two pages are usually enough. Include:
- The base year (or averaged years) and the reason for the choice; a separate scope 3 base year if you have one.
- The significance threshold: the percentage, cumulative or annual, and against which total (scope 1+2 or all scopes).
- Triggers: structural change, outsourcing and insourcing, method and data improvements, errors.
- Non-triggers: organic growth and decline, site openings and closures, facilities that did not exist in the base year, fuel and technology change.
- Timing: full-year basis for mid-year changes, next year if data is late.
- Reporting: recalculated figures and, optionally, the originally reported figures side by side.
The standard encourages showing the original, unrecalculated figures as well, because it makes changes in company structure visible over time. Verifiers will ask for the base year file, the policy and the rationale for each recalculation. ISO 14064-1 likewise requires a documented base-year inventory and recalculation procedure (clause 6.4); since the ISO text is paywalled, this guide relies on the openly available GHG Protocol text. For the verification process, see our ISO 14064-1 guide.
Where Carbonet fits
Carbonet is a carbon footprint and CBAM software developed by LNA Soft in Izmir, Türkiye. All sites and organisational boundaries are managed from one screen with no limit on the number of sites, which makes it easier to track a site moving into or out of the base year. The emission factor source (IPCC, DEFRA, EPA, TÜİK) and AR5/AR6 choice are set per user, and factors for the base year and later years can be moved to the current database in one step. Reports follow ISO 14064-1 and the GHG Protocol, in Turkish and English. See the inventory categories on our ISO 14064 GHG inventory page.
Conclusion
The base year anchors every comparison in a carbon report. Pick a complete and representative year, write down why, adopt a short policy with a threshold and clear triggers, and apply it consistently. Closing a site is a real reduction; selling it is not. A company that gets this distinction right has reduction claims that survive verification and an EU customer's review.
To set up your base year and recalculation policy with us, request a demo, write to info@carbonet.com.tr or reach us on WhatsApp: +90 533 368 05 99.
Frequently asked questions
What is a base year in GHG accounting?
It is the reference year against which current emissions are compared. Under the GHG Protocol, a company chooses a year with verifiable data and reports why it chose it. When used as the starting point of a reduction target, it is called the target base year.
Can the base year be an average of several years?
Yes. Most companies use a single year, but an average of several consecutive years is allowed. A multi-year average smooths out one-off fluctuations such as shutdowns or unusual order peaks.
Does closing a site require base year recalculation?
No. The GHG Protocol treats closing or opening your own operating units as organic change, a real decrease or increase that should show in the report. Selling a site to another company is a structural change and, if significant, is removed from the base year.
What significance threshold should we use?
The GHG Protocol does not prescribe one; the company sets and discloses it and the verifier checks adherence. The standard cites the California Climate Action Registry's 10% cumulative threshold as an example. External programmes may set their own thresholds.
Do updated emission factors require recalculating past years?
Yes, if you move to a more accurate factor or method and the difference is significant. No, if the factor change reflects a real change such as a switch of fuel or technology. Improvements that cannot be applied to past years should be disclosed.
How is a mid-year acquisition handled?
The base year is recalculated for the entire year using the acquired facility's base year emissions, and the reporting year is stated on a full-year basis for consistency. If data is not yet available, the recalculation can be made the following year. If the facility did not exist in the base year, the base year does not change.